A2 2-Channel Power AmplifierWhether you specify the A2 in a home theater application or in a distributed audio system, this single rack-height amp provides enough power to handle the most inefficient freestanding speakers or a whole house full of in-walls.
The A2 amplifier will deliver 150 WPC of power into 2-Ohm loads, 100 WPC into 4 Ohms, and 60 WPC into 8 Ohms.
Three pairs of gold-plated, five-way speaker binding posts make it easy to connect multiple speakers. The remote trigger input mutes the amplifier when the preamp is turned off. Gain pots for each channel are accessible via the front panel.
| 150 WPC RMS into 2 Ohms, 100 WPC RMS into 4 Ohms, 60 WPC RMS into 8 Ohms |
| Buffered line level outputs |
| Remote trigger IN/OUT |
| Only 1 rack-space high |
| Frequency Response |
20Hz to 20kHz -.5dB |
| Full Power Bandwidth |
5Hz to 30kHz |
| Signal to Noise |
>110dB (A-weighted) |
| Channel Separation |
>70dB @ 1kHz |
| THD |
< 0.03% |
| Intermodulation Distortion |
< -90dB |
| Voltage Gain (Av) |
0 to 28, front panel adjustable |
| Input Impedance |
33k Ohms |
| Remote Trigger Input |
5-24V AC/DC |
| Trigger Loop Output |
+12VDC @ 0.1A |
| AC Power Requirements |
120VAC, 440W |
| Current Draw |
3.7A @ 120VAC |
| A2 Dimensions |
(in.) 17 W x 2-1/4 H x 11 D, (mm) 432 W x 58 H x 280 D |
| A2 Dimensions |
(in.) 19 W x 1-3/4 H x 11 D, (mm) 483 W x 45 H x 280 D |
| Weight |
16 lbs/7.2 kg |
| ETLŪ listed & CE approved |
