|
|
D400 2-Channel Digital Power AmplifierELAN’s D Series Amplifiers are truly in a class all by themselves. These amps are the first amplifiers to embrace Class T digital technology, which provides the very best in performance, efficiency and sound for the space. Typical amplifiers waste over half their energy as heat. The ELAN D Series of premium amps use Class T digital technology that is over 85% efficient. This means all power is produced as incredible sound rather than heat.
ELAN uses ACE™ which is our “Automatic Clip Eliminator” circuitry. This is an ELAN-engineered, patent-pending dynamic leveling circuit that makes all D Series amps virtually clip-proof, ensuring the cleanest power at all times. Low Impedance The D400 is stable down to 2 Ohms, meaning that you can load it down with up to six 8 Ohm speakers. Perfect for large rooms with multiple speakers or outdoor areas that need lots of umph!
| Class T digital technology |
| Low heat/high efficiency rating of 85% |
| ACE™ Automatic Clip Eliminator |
| Blue LED display |
| Individual channel level setup via front panel buttons |
| "Lockout" feature fixes level settings |
| Buffered Loop Outputs for ea. channel |
| Trigger In / Out |
| ETL® & C-tick listed, CE approved |
| 2 Channels of digital amplification |
| 200 WPC RMS into 2 Ohms, 135 WPC RMS into 4 Ohms, 80 WPC RMS into 8 Ohms |
| Stable down to 2 Ohms |
| Only 1 rack-space high |
| Trigger input / output |
| Gold-plated 5-way speaker binding posts |
 
| Power Output (RMS) per Channel |
200W RMS @ 2 Ohms, 135W RMS @ 4 Ohms, 80W RMS @ 8 Ohms |
| Frequency Response |
20Hz to 20kHz, +/-0.5dB into 8 Ohms |
| Full Power Bandwidth |
10Hz to 50kHz |
| Signal to Noise |
>102dB (A-weighted) |
| Channel Separation |
>70dB (channel to channel @ 1kHz) |
| Total Harmonic Distortion |
< .04% |
| Intermodulation Distortion |
< 0.1% |
| Voltage Gain (Av) |
Continuously variable from 0 - 27 |
| Slew Rate |
>20V/microsecond |
| Input Impedance |
49k Ohms |
| Input/Loop Outputs |
Gold RCA phono |
| Speaker Outputs |
5-way binding posts |
| Trigger Input |
5 to 24 Volts AC/DC |
| Trigger Loop Output |
+12VDC @ 0.1A |
| AC Power Requirements |
120VAC, 750W or 240VAC, 750W |
| Current Draw |
6.25A @ 120VAC 3.15A @ 240VAC |
| D400 Dimensions (w/feet) |
(in.) 17 W x 2-1/4 H x 15 D, (mm) 432 W x 58 H x 380 D |
| D401 Dimensions |
(in.) 19 W x 1-3/4 H x 15 D, (mm) 483 W x 45 H x 380 D |
| Weight |
22 lbs/10 kg |
| ETL® & C-tick listed, CE approved |
|
|
