Multi-Room Controller...

Amplifiers...

Z-POWER Power Controller

The Z·POWER Controller is a critical hub for both home theater and distributed A/V systems, addressing such needs as surge protection, sequenced AC switching and multiple triggering options.

The Z·POWER Controller has eight earthgrounded outlets. Two current sensing outlets are always on. Four outlets turn on immediately with a trigger input. Two more turn on with a programmable delay.

No other power manager has as many trigger options. The six switched outlets can be triggered by the AC current sense of the two “Always On” outlets, by a remote trigger input,from the ELAN™SENSE sensor input, or by the front panel switch. Any combination of triggers can be selected so that multiple sources can initiate the turn-on sequence.

The 12VDC triggered output and a relay contact closure make it easy to close drapes or lower screens. And the relay output is programmable, allowing home theater triggered events to close drapes, but system-triggered events to turn on sources without closing the drapes!

High-quality transient voltage protection is also included, with inductive AC line filtering, MOV Surge Protection, 15A Circuit Breaker, a 2-line telephone surge suppressor and 1GHz coax surge suppressor loop-through.

Front Panel LEDs indicate status and fault monitoring of the AC line.

The Z·POWER Controller provides an extended warranty against surge on specified ELAN equipment purchased with and connected directly to it.